China Fully Threaded Steel Rod M6 M7 M8 - Quality Suppliers and Factory for Fastening Solutions
| Parameter | Range / Options |
|---|---|
| Diameter | M3 – M64 (metric) 1/4″ – 2-1/2″ (inch series) |
| Length | 1 m – 6 m (standard: 3m, 6m) Custom lengths available |
| Thread Pitch | Coarse (standard) or fine pitch per application requirements |
| Thread Direction | Right-hand (standard) Left-hand available for special applications |
| Material Type | Standard | Common Grades | Finish Options |
|---|---|---|---|
| Carbon Steel | ASTM A307 | Grade A (general purpose) | Plain, Oiled, Zinc Plated, HDG |
| ASTM A193 | Grade B7 (high strength) | Plain, Black Oxide | |
| DIN 975 / 976 | 4.8, 5.8, 8.8, 10.9, 12.9 | Various | |
| ISO 898-1 | Class 4.6, 4.8, 5.8, 8.8, 10.9 | ||
| Stainless Steel | ASTM A193 / A320 | B8 (304), B8M (316) | Plain, Passivated |
| DIN 975 / 976 | A2 (304), A4 (316) | Plain | |
| Galvanized | ASTM A153 / A123 | Various base grades | Hot-Dip Galvanized (HDG) |
| Brass / Bronze | ASTM B16 / B124 | C36000, C46400 | Plain |
| Nylon / Plastic | Various | Nylon 6/6, PVC | Colored options |
Full-length threads allow cutting to any length and provide maximum engagement with nuts and couplings anywhere along the rod.
Can be used with hex nuts, coupling nuts, flange nuts, wing nuts, or directly threaded into tapped holes.
Easily cut to desired length using standard tools without thread damage.
Available in multiple strength grades to match application requirements.
Various material and coating options suit indoor, outdoor, and harsh environments.
Extensively used to suspend HVAC equipment, ductwork, piping, electrical conduits, and cable trays from ceiling structures using beam clamps and hanger assemblies.
Combined with pipe clamps, clevis hangers, and trapeze systems to provide adjustable vertical support for plumbing, fire protection, and mechanical piping.
Used with expansion anchors or chemical anchors to secure equipment, machinery, structural steel, and building components to concrete floors and walls.
Employed as diagonal tension rods for seismic bracing, wind bracing, and stabilization of structural frames and equipment racks.
Support motors, pumps, fans, transformers, switchgear, and control panels with adjustable-height mounting solutions.
Used as tie rods for concrete formwork systems, providing tension resistance between opposing form faces during concrete placement.
Serve as adjustable legs, connectors, and structural elements in industrial shelving, workbenches, display fixtures, and custom fabrications.
Applied in engine mounts, exhaust system hangers, and chassis component connections where vibration resistance is required.
Stainless steel grades (316) provide corrosion resistance for saltwater environments in shipbuilding, docks, and offshore platforms.
Used in solar panel mounting structures, wind turbine tower connections, and hydroelectric equipment supports.