Leave Your Message

China Suppliers of High-Quality Flat Steel Bars from a Leading Factory for Structural Supports and Fabrication

Steel flat bars, often referred to as flat steel or rectangular bars, are essential long steel products with a rectangular cross-section that features parallel flat surfaces and consistent thickness throughout their length. These flat profiles deliver exceptional stiffness in one plane and are remarkably easy to cut, drill, weld, and form, making them among the most versatile and widely used steel products in construction, fabrication, and industrial manufacturing. Typically classified as long products, flat bars have a width of less than 150 mm and a thickness greater than 5 mm, distinguishing them from steel sheets that are categorized as flat products. As a leading supplier in China, our factory ensures high-quality steel flat bars that meet the diverse needs of various industries

    Specification

    Parameter Range / Options
    Width 10 mm – 400 mm (1/2" – 6" in imperial)
    Thickness 3 mm – 60 mm (1/8" – 5/8" in imperial)
    Length 3 m – 12 m (standard: 6m, 20ft)
    Popular Sizes 30×3, 30×5, 40×5, 50×5, 50×8, 50×10, 60×5, 60×8, 60×10, 80×8, 80×10, 100×10, 100×12, 120×10, 150×10 mm

    Material Standards

    Material Type Standard Common Grades
    Carbon Steel ASTM A36 A36 (structural applications, 36 ksi yield) -5-6-7
    EN 10025-2 S235JR (1.0038, formerly St37-2, equivalent to A36) -6
    EN 10025-2 S355J2 (1.0577, formerly St52-3, equivalent to A572 Grade 50) -6-10
    JIS G3101 SS400, SS490 -7
    GB/T 1591 Q235, Q345 -7
    Stainless Steel ASTM A276 304/L, 316/L -3-10
    EN 10088 1.4301, 1.4404 -10
    Spring Steel ASTM A29 5160 -7
    Aluminum EN Standards EN AW-5083, EN AW-7075

    Manufacturing Methods

    Hot Rolling

    Steel is heated above recrystallization temperature and passed through rolling mills to achieve the desired rectangular cross-section. This is the most common production method for standard flat bars, resulting in a mill-scale surface finish (scale thickness approximately 20–50 μm). Hot rolled flat bars are suitable for general construction and fabrication where surface finish is not critical.

    Cold Rolling / Drawing

    Hot-rolled bars are further processed at room temperature to achieve tighter dimensional tolerances, superior surface finish, and increased strength. Precision flat steel with regular or oversize dimensions is available for applications requiring high dimensional accuracy.

    Edge Finishing Options

    Precision machined edges are deburred and smooth, offering fabrication benefits in terms of component alignment for welding and improved handling. Thermal cut edges are produced by cutting plate into narrower strips for thicker sections.

    Surface Finishes

    Black / Natural Finish

    As-rolled with mill scale, typically used for construction and general fabrication.

    Shot Blasted / Pickled

    Clean surface free from mill scale, prepared for painting or further treatment.

    Primed / Painted

    Shop-applied primer coating for temporary protection.

    Hot-Dip Galvanized

    Zinc coating applied per ASTM A123 or EN ISO 1461 for corrosion protection. The flat geometry is particularly well suited to galvanizing, providing consistent coverage without hidden surfaces.

    Oiled

    Temporary rust protection during transit.

    Applications

    Steel Construction and Fabrication

    Flat bars are essential components in structural steelwork for frames, gusset plates, connection brackets, stiffener ribs, and base plates. S355J2 flat bars are widely used for column base plates and beam splice connections where high bearing resistance is required.

    Gates, Railings and Fencing

    Flat bars provide clean lines, smooth surface and mechanical strength required for balustrades, handrails, fence panels, staircases, and ornamental ironwork. They are also used in railing manufacturing and decorative products.

    Machine Building and Manufacturing

    Guide rails, keys, spacer plates, backing strips for welded joints, wear strips, and machine bed levelling shims. The flat cross-section allows precise machining to tight tolerances.

    Transport and Agriculture

    Trailer chassis reinforcement, body-building brackets, equipment mounting plates, agricultural machinery components, and transportation components.

    Infrastructure and Heavy Construction

    Used in bridge construction, crane sectors, and as main carrier products in building structures. Wide flat bars serve as large stiffener plates, wear liners, and heavy base plates.

    Miscellaneous Fabrication

    Reinforcement strips in concrete formwork, knife bars, clamping bars, hinge straps, furniture making, shipbuilding, railway spare parts, iron towers, boilers, and general workshop stock.

    Frequently Asked Questions

    What are the standard size ranges available for flat bars?
    Flat bars typically come in widths ranging from 10 mm to 400 mm (1/2" to 6" in imperial) and thicknesses from 3 mm to 60 mm (1/8" to 5/8" in imperial). The standard lengths range from 3 m to 12 m, with 6 m (20ft) being the most common standard.
    What is the difference between Hot Rolled and Cold Rolled flat bars?
    Hot rolled flat bars are manufactured above recrystallization temperature, resulting in a mill-scale surface finish suitable for general construction where tight tolerances are not critical. Cold rolled flat bars are processed at room temperature, providing tighter dimensional tolerances, superior surface finishes, and higher strength.
    Which steel grades are recommended for structural construction?
    For structural applications, carbon steel grades like ASTM A36 and EN 10025-2 S235JR are commonly used. For high bearing resistance, such as column base plates and beam splice connections, S355J2 (equivalent to A572 Grade 50) is highly recommended.
    What surface finish options are available for corrosion protection?
    For robust corrosion protection, Hot-Dip Galvanizing per ASTM A123 or EN ISO 1461 is ideal because the flat geometry allows consistent coverage. Other options include primed/painted finishes for temporary protection and oiled finishes to prevent rust during transit.
    What are the common edge finishing options?
    Options include precision machined edges, which are deburred and smooth to improve component alignment for welding and handling, and thermal cut edges, which are produced by cutting plates into narrower strips for thicker sections.